Information

2024 Case IH Flex Auger Heads 3020 30

Case IH flex auger heads allow you to master uneven terrain, limit grain loss, and guarantee even crop feeding.

Flex Auger Heads

The Case IH flex auger heads feature the innovative Terraflex™ suspension system, providing a wider range of adjustments. With a fully-welded frame, a high-capacity knife drive and a smooth feeding system, these flex auger heads are versatile, durable and designed to match the high capacity levels of the Axial-Flow® combines.

The 3020 Series flex heads provide the latest in flex head technology.

Features may include:

Frame Design

The 3020 flex auger head is fully welded with an impressive 6-in by 6-in top frame beam and 4mm auger floor.

Crop Dividers - The 3020 header incorporates poly crop dividers that have a simple but very effective design, gently presenting the most down and tangled crop to the reel and cutterbar while positively following ground terrain.

Header Drive - PTO shaft(s) transfer shaft-driven power to both the auger and knife drives. The knife drive is driven with a heavy duty belt. The auger drive is driven with a heavy duty #80 chain.

Cutterbar

The TerraFlex™ provides a wider range of adjustment options than competitive hydraulic suspension systems. Integrated grain saver prevents crop from falling off the cutterbar, with fewer moving parts and reduced friction leading to reliability and responsiveness.

• Easy Cutterbar Adjustments: Ground Pressure is controlled by a fully adjustable torsion block and easily adjusted by manual adjustment screws on the back side of the header.

• Total Inches of Travel: Six total inches of travel, three up and three down

• Skid Shoes: Reel position sensors are located on both reel up/down and fore/aft, while its short profile allows the shoes to follow constantly changing ground conditions. Pressure from the cutterbar is only spread over a small area on the skid shoes, it will prevent the header from “pushing” in soft or muddy conditions.

Rigid Cutterbar Mode: For cutting off the ground in crops such as wheat, the cutterbar can be locked rigid. The Cutterbar is locked by simply moving a locking pin on each suspension arm.

Knife & Knife Drive

• Single heavy-duty high capacity wobble box knife drive

• The knife drive is belt driven from the left side of the head

• 30 & 35 ft headers have available dual knife drive for use in heavy crop or cutting across rows

• The guard and knife ensure that down and tangled crop is picked up and properly cut

• The 3020 header comes standard with a 3-inch fine cut knife and guard

• The 3 inch knife provides excellent cut quality while promoting high cutting speeds

Pick-Up Reel

• Six Bat Reel: The Case IH 3020 six bat reel positively sweeps the crop, and then gently lifts the crop over the cutterbar to the auger, designed for gentle crop engagement to ensure proper feeding and cutting.

• Reel Position Sensors: Reel position sensors are located on both reel up/down and fore/aft; the reel is automatically programmed to the set height of the header. This allows for a short bean and a tall bean setting for the reel. Proper reel position increases grain savings and combine productivity.